Hubbell HBL430C7W

78358540452

Watertight IEC Pin and Sleeve Connector, 3P4W, 30A 3PH 480V Hubbell HBL430C7W

Hubbell Pin and Sleeve Products, Watertight IEC Pin and Sleeve Connector, 3P4W, 30A 3PH 480V

Specs:
IEC Product Type Watertight
Service Style Standard
Device Connector
Amperage 30A
Voltage 3 Phase 480V
Poles and Wires 3 Pole, 4 Wire
Terminal Accommodations #12 To #8 AWG copper wire only
Cord clamp range .375" To 1.250"
Color Red

Replacement Interior Number IN430DF
Housing Zytel 801 Nylon
Contact Carrier High-Impact Thermoset
Retainer High-Impact Thermoset
Terminal Screws Stainless Steel (300 series)
Assembly Screws Stainless Steel (300 series)
Gaskets Solid Neoprene
Cord Clamps Rynite SST35
Grommet/Glands Solid Neoprene
Cover Arm Rynite SST35
Arm Spring Stainless Steel (17-1 Type)
Cord Clamp Screws Stainless Steel (300 Series)
Clamp Nut Nickel Plated Brass
Cover Rynite SST35
Cover Screw/Rivet Nickel Plated Brass
Rotating Sealing Disc Polycarbonate
Ground/Phase Sleeve Brass
Pin/Sleeve Spring Stainless Steel (300 Series)
Dielectric Withstand Voltage Withstands 3,000V AC Min.

Max Working Voltage 600V RMS (i.e.minimum creepage distance 10 mm minimum)
Current Interrupting Certified for current interrupting at full rated current.
Temperature Rise Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%.
Endurance 5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and 1,000 cycles w/o load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles w/o load for 100A and 125A.

Impact Resistance Per CSA C22.2 No. 182.1 / UL1682.
Cord Grip Retention Per CSA C22.2 No. 182.1 / UL1682.
Cord Accommodation Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.
Terminal Identification Terminals identified in accordance with North American and IEC conventions.
Product Identification Identification and ratings are a permanent part of the device housing.
Moisture Resistance Watertight per IEC 60309-1
Ingress Protection IP 67 Suitability
Operating Temperatures Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact.

Ratings:
Certification UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 and UL1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets, LR285C for Receptacles, CSA Standard C22.2 No. 182.1, UL Classified to IEC60309-1, IEC. Flammability HB or Better per UL 94 or CSA C22.2 No. 0.17. UL Listed, UL Standard 498 CSA Certified to CSA Spec. C22.2 No. 182.2 UL Classified to IEC 309-1 and IEC 309-2.

Description:
Every Hubbell non-metallic Pin and Sleeve product is designed to meet the International Standard IEC 60309-1 and IEC 60309-2. This device standard calls out singly rated, non-interchangeable configuration for every voltage and type of service.