**This product is typically stocked and shipped by the manufacturer. Please allow a 24 to 48 hour lead time. Please contact us if a more precise lead time is required.

Flir Power Clamp Meter, Flir CM83

Specifications:
AC/DC Current Range 599.9 A Max, +/- 2%
AC/DC Voltage 999.9 V Max, +/- 1% / 0.7%
Harmonics 1st-25th Order, +/- 5%
Total Harmonic Distortion 0.0 to 99.9%, +/- 3%
Inrush Current 599.9 ACA Max (Integration Time 100 ms), +/- 3%
Active Power 9.999 kW to 599.9 kW, (10 V, 5 A min), +/- 3%
Diode Test 0.4 to 0.8 V, +/- 0.1V
Capacitance 3.999 mF Max, +/- 1.9%
Resistance 99.99 kO Max, +/- 1%
Continuity Threshold 30 O, +/- 1%
Frequency 20.00 Hz to 9.999 kHz, +/- 0.5%
Jaw Opening 37 mm (1.45”, 1500MCM)
Bluetooth Range Max 32 ft (10 m)

Ratings:
CAT IV-600V, CAT III-1000V, CE, UL, FCC

Description:
VFD Mode: Accurately analyze non-sinusoidal waveforms and noisy signals in VFD-controlled equipment. Harmonics Mode: Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress. Phase Rotation: Analyze three-phase systems to measure power draw and verify if power is evenly balanced. Inrush Current: Measure hard and soft start-up inrush current spikes while equipment is ramping up. METERLiNK Compatibility: Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation. Power Factor and Active Power: Monitor power quality improvements, such as start-up realignments on three-phase equipment. Bluetooth Connectivity: Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords. Bright Dual-LED Worklights: Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets. Rugged & Shock-Resistant: Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.